PULL STUDS

PULL STUDS 

Serinex produces every kind of pull studs:

It is also possible to supply the pull studs with a specific anti rusting treatment.

Every pull stud follows a high-quality standard to pursue the maximum operative safety. For our production we only use high-quality steel bar, produced in qualified steel plant, provided with quality certifications and individually controlled with ultrasounds in order to avoid internal deficiency of the material.

Furthermore, our pull studs production undergoes a specific heat-treatment to obtain superior quality of resistance and resiliance. All the mechanical workings are performed in our modern division in Annone Brianza, not far from Lecco, in a place of more than 7000 mq. supplied with a wide rolling stock with a high daily production. In our productive unit, we only use latest generation cNc machines; furthermore every working phase is carefully controlled by our technicians, following the procedures of the certification ISO 9001: 2015, and verified by our twenty-years experience. In our automatic storehouse every kind of pull studs is always available, in every typology on the market.

Serinex produces every kind of pull studs:

It is also possible to supply the pull studs with a specific anti rusting treatment.

Every pull stud follows a high-quality standard to pursue the maximum operative safety. For our production we only use high-quality steel bar, produced in qualified steel plant, provided with quality certifications and individually controlled with ultrasounds in order to avoid internal deficiency of the material.

Furthermore, our pull studs production undergoes a specific heat-treatment to obtain superior quality of resistance and resiliance. All the mechanical workings are performed in our modern division in Annone Brianza, not far from Lecco, in a place of more than 7000 mq. supplied with a wide rolling stock with a high daily production. In our productive unit, we only use latest generation cNc machines; furthermore every working phase is carefully controlled by our technicians, following the procedures of the certification ISO 9001: 2015, and verified by our twenty-years experience. In our automatic storehouse every kind of pull studs is always available, in every typology on the market.

  • MAS 403 BT

    PULL STUDS MAS 403 BT

    PULL STUDS MAS 403 BT

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • DIN69872

    PULL STUDS DIN 69872

    PULL STUDS DIN 69872

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • ISO7388/2A

    PULL STUDS ISO 7388/2A

    PULL STUDS ISO 7388/2A

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • ISO7388/2B

    PULL STUDS ISO 7388/2B

    PULL STUDS ISO 7388/2B

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • MAZAK

    PULL STUDS MAZAK

    PULL STUDS MAZAK

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • HURCO

    PULL STUDS HURCO

    PULL STUDS HURCO

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • JIS-B 6339

    PULL STUDS JIS-B 6339

    PULL STUDS JIS-B 6339

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • DIN69871 OTT/TC

    PULL STUDS DIN69871 OTT/TC

    PULL STUDS DIN69871 OTT/TC

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • MAS 403 OTT/BT

    PULL STUDS MAS 403 OTT/BT

    PULL STUDS MAS 403 OTT/BT

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • KITAMURA

    PULL STUDS KITAMURA

    STRAIGHT COLLETS FOR HYDRAULIC AND POWER MILLING CHUCKS

    PULL STUDS KITAMURA

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • MITSUI

    PULL STUDS MITSUI

    PULL STUDS MITSUI

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • CHIRON

    PULL STUDS CHIRON

    PULL STUDS CHIRON

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • C.B. FERRARI

    PULL STUDS C.B. FERRARI

    PULL STUDS C.B. FERRARI

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • FOR WOOD

    PULL STUDS FOR WOOD

    PULL STUDS FOR WOOD

    TECHNICAL FEATURES

    • • Manufactured with special steel;
    • • Carburized, hardened, tempered, sandblasted and burnished;
    • • Grinding on the adaptor profile, with rebores CNC supplied with positioning device and indicator in process.

    INSTRUCTIONS AND PRECAUTIONS

    • • For correct fitting we recommend the use of a thread locking adhesive.
    • • It is dangerous to use pull studs where the quality of the materials and heat treatment are not guaranteed. The breaking of a pull stud ruins the cone of the machine and is dangerous for the operator.
    • • Pull studs should be torqued as follows: M12: 2 ÷ 2,4 Kgm - M16: 6 ÷ 7,8 Kgm - M24: 20 ÷ 24 Kgm

    MANUFACTURING SPECIFICATIONS

    • • Manufactured with special steel with maximum impact strength.
    • • Casehardened and tempered to HRC 56 ÷ 60; the thread is soft HRC 45.
    • • Functional surfaces completely ground.
  • SPECIALS

    SPECIAL PULL STUDS

    DISEGNO CODOLO SPECIALE.JPG

    We can produce special pull studs on specific customer drawings or requests.

    To receive a quote, you have to fill in the form below specifying the number of pieces requested and, if possible, attach a drawing or indicate the reference dimensions shown in the graph above.

    Registration Form