TOOLHOLDERS

TOOLHOLDERS 

Serinex, an Italian company, is highly specialized in the production and construction of toolholders of all types

Every adapter is produced following a high-qualitative standard to pursue maximum operative safety. We have a productive unit dedicated to adapters production supplied with last generation CNC machines, with all the most severe production controls, following the norm of the certification ISO 9001: 2015. For our production we only use high-quality steel bar, produced in qualified steel plant, provided with quality certifications and individually controlled with ultrasounds in order to avoid internal deficiency of the material. Furthermore all our production of tool holders undergoes a specific heat-treatment to obtain superior quality of RESISTANCE and RESILIENCE.. All the mechanical workings are performed in our modern division in Annone Brianza, not far from Lecco, in a place of more than 7000 mq. , supplied with a wide rolling stock with a high daily production. Our technical office can provide expert advice for the production of “special toolholders” with specific characteristics, in order to satisfy the desires of our clients.

categoria-serinex-mandrini.jpg

Serinex, an Italian company, is highly specialized in the production and construction of toolholders of all types

Every adapter is produced following a high-qualitative standard to pursue maximum operative safety. We have a productive unit dedicated to adapters production supplied with last generation CNC machines, with all the most severe production controls, following the norm of the certification ISO 9001: 2015. For our production we only use high-quality steel bar, produced in qualified steel plant, provided with quality certifications and individually controlled with ultrasounds in order to avoid internal deficiency of the material. Furthermore all our production of tool holders undergoes a specific heat-treatment to obtain superior quality of RESISTANCE and RESILIENCE.. All the mechanical workings are performed in our modern division in Annone Brianza, not far from Lecco, in a place of more than 7000 mq. , supplied with a wide rolling stock with a high daily production. Our technical office can provide expert advice for the production of “special toolholders” with specific characteristics, in order to satisfy the desires of our clients.

categoria-serinex-mandrini.jpg

  • TC - DIN69871

    TOOLHOLDERS TC - DIN69871

    TECHNICAL FEATURES

    • • Manufactured with certified steel
    • • Heat treatments are performed by certified suppliers ISO 9001.
    • • Precision ground on shanks, inside tapers and collet nut threads
    • • Tested with high precision inspection and ganging equipment.
    • • Taper accuracy of ISO SHANKS lower than AT2.
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003mm.

    INSTRUCTIONS

    • The toolholders are provided in the form ad or ad/b. in case of ad/b, the lubricant passes through the holes on the flange. The operator will have to remove the closing screws that he will already find mounted on the toolholder.

    CONO/TAPER d1 d2 d3 d6 d8 MAX L1 a k f3
    TC30

    31,75

    M12

    13 50 45 47,8

    3,2

    15,9

    35

    TCB40

    44,45

    M16

    17 63,55 50 68,4 3,2 15,9 35
    TCB45

    57,15

    M20 21 82,55 63 82,7 3,2 15,9 35
    TCB50

    69,85

    M24

    25 97,5 80 101,8 3,2 15,9 35

  • MAS403-BT/JIS6339

    TOOLHOLDER MAS 403 - BT / JIS6339

    TECHNICAL FEATURES

    • • Manufactured with certified steel.
    • • Heat treatments are performed by certified suppliers ISO 9001.
    • • Precision ground on shanks, inside tapers and collet nut threads.
    • • Tested with high precision inspection and ganging equipment.
    • • Taper accuracy of ISO SHANKS lower than AT2.
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003mm.

    INSTRUCTIONS

    • The toolholders are provided in the form ad or ad/b. in case of ad/b, the lubricant passes through the holes on the flange. The operator will have to remove the closing screws that he will already find mounted on the toolholder.

    CONO/TAPER d1 d2 d3 d6 L1 a k f3
    BT30

    31,75

    M12 12,5 46 48,4 2 20 22
    BTB40

    44,45

    M16 17 63 65,4 2 25 27
    BTB50

    69,85

    M24 25 100 101,8 3 35 38

  • HSK-DIN69893

    TOOLHOLDERS HSK-DIN69893

    Serinex produces toolholders with 4 types of HSK joint:

    HSK toolholders are produced in certified steel in compliance with international standards and procedures dictated by ISO 9001: 2015 certificates.

  • CAPTO

    CAPTO TOOLHOLDERS

    COPERTINA CAPTO.JPG

    TECHNICAL FEATURES

    • • Manufactured with certified steel
    • • Heat treatments are performed by certified suppliers ISO 9001
    • • Precision ground on shank, inside tapers and collet nut threads
    • • Tested with high precision inspection and ganging equipment
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003 mm.

    CAPTO SENZA QUOTE.JPG

    CPTACF
    32 32 19 15
    40 40 24 20
    50 50 30 20
    63 63 38 22
    80 80 48 30
    100 100 60 36
  • DIN2080

    TOOLHOLDERS DIN2080

    TECHNICAL FEATURES

    • • Manufactured with certified steel
    • • Heat treatments are performed by certified suppliers ISO 9001
    • • Precision ground on shanks, inside tapers and collet nut threads.
    • • Tested with high precision inspection and ganging equipment.
    • • Taper accuracy of ISO SHANKS lower than AT2
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003mm.
  • VARILOCK SYSTEM

    TOOLHOLDERS FOR VARILOCK SYSTEM

    TECHNICAL FEATURES

    • • Manufactured with certified steel.
    • • Heat treatments are performed by certified suppliers ISO 9001.
    • • Precision ground on shank, inside tapers and collet nut threads.
    • • Tested with high precision inspection and ganging equipment.
    • • Taper accuracy of TOOLHOLDER FOR VARILOCK SYSTEM lower than AT2.
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003 mm.
  • STRAIGHT SHANK

    TECHNICAL FEATURES

    • • Manufactured with certified steel.
    • • Heat treatments are performed by certified suppliers ISO 9001.
    • • Precision ground on shank, inside tapers and collet nut threads.
    • • Tested with high precision inspection and ganging equipment.
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003 mm.
    • • Available with or without flat.
  • FLOATING REAMER HOLDERS

    TECHNICAL FEATURES

    • • Manufactured with certified steel.
    • • Heat treatments are performed by certified suppliers ISO 9001.
    • • Precision ground on shank, inside tapers and collet nut threads.
    • • Tested with high precision inspection and ganging equipment.
    • • The maximum error of concentricity between the cone and the seat of tool is 0.003 mm.
    • • Radial oscillation 3 mm.

  • SPECIALS

    SPECIAL TOOLHOLDERS

    We have expanded the production of tool holders by including specific ones for marble in our production range.

    We also have the possibility to produce special parts according to the customer's request.

    To receive a quote, we ask you to fill in the form below specifying the number of pieces required and, if possible, attach a drawing.

  • MANDRINI HSK-A PER FRESE WELDON